Sourcing the wires

 Sourcing the wired

 We can keep it short here with wires.

Recommended are the wires for everything which goes from the printer to the mainboard: (Hotend, endstops etc)

Ölflex Heat 205SC
Heluflon FEP-6Y

Both will last very long in drag chains.

0,25mm² and 0,5mm² are enough here. Source at least 25 meter of the 0,25mm², you will need a lot for further extensions. The 0,5mm² is used for the hotend heater and/or a toolboard. So you will have plenty on spare if you source 10m.


Additional some wired for the main power of the power supply and some wired from the PSU to the mainboard. I tripped a old PC power cord and used them for the PSU. I had some red and black wires around for distributing the 24V. Something above 1.5mm³ is enough.

 

More here: https://docs.vorondesign.com/build/electrical/

Comments

Post a Comment

Popular posts from this blog

Welcome to my Voron 2.4 Schnitzelbuild Blog

This blog will contain my continuous build process of a Voron 2.4 the way I think is the best. I started with a Voron 0.0 and went instantly to the next project a Voron 2.4. I learned so much that I thought it could be nice to build a 2nd 2.4 with the gathered knowledge from the previous builds. You guys are invited to join me on my journey. The idea is to list every component on a page and show all of the possible solutions to get your hands on that component. This should help beginners to source t heir own Voron 2.4. It is likely that I will source components in the upper price range, but I will show good components on every step suitable for a tighter budget. With one limitation: I will not make any compromises on safety.   I'm located in good old Germany, so it is likely that you will find German only shops and some other Germany specific parts . Let me know if you know other sources, I'm happy to add them to the pages then . Feel invited to follow my ...
Read more